Bliss Spa

From $9,999
2.10 x 1.85 x 0.92m
900 ltr
Weight (full)
1,243 kg

Why choose an Arcadia Bliss?

Narrow spa for people short of space

The Bliss by Arcadia Spas is a great value, single lounger, 4 person spa. The Bliss features a somewhat unique, rectangular design. As such, it is suitable for installation onto decks or other areas with width restrictions. Despite it’s narrowness, it still has ample space for 4 adults and features a full length lounger.

Deep and decent hydrotherapy

The Bliss is also a very deep spa making it great for people of taller stature. It’s 32 hydrotherapy jets, including a volcano jet in the footwell ensuring a great hydrotherapy massage for all.


Stainless steel jets
Perimeter and cabinet lighting
Corona discharge ozone water clarifier
UV water purifier
Dual layer insulation

Our Price$9,999

Spa World Rating

Energy Efficiency
Build Quality
In-Spa Experience
Water Maintenance
How we rate our spas

Choosing the right spa can be confusing. Especially when faced with many options to choose from. To simplify this process, we have used our years of spa experience to create a simple rating system that compares our huge range of spas across a number of important attributes.

Download spec sheet

Seating design

The Arcadia Bliss seats four adults in comfort. 
bliss seating layout

Hydrotherapy lounger

The Bliss’s hydrotherapy lounger is fully loaded. In addition to its powerful back massage jets, it has a series of hydrotherapy jets placed along your buttocks, and legs.  

 lounger seat

2 back massage seats

The Arcadia Bliss features two corner back massage seats. Up to 8 hydrotherapy jets will work wonders on your back.

 back massage

Cool-down seat

Spa time can get a bit hot, that's why Arcadia have fitted a cool down seat to allow you to moderate your temperature.

 Cool down seat

Bliss Features

In-Spa Experience
lounger seat
Hydrotherapy lounger seat

The Bliss is a true hydrotherapy spa. It features a hydrotherapy lounger equipped with expertly placed hydrotherapy jets that soothe and massage your whole body. The loungers jet pressure can be controlled individually.

pressure control
Individual seat pressure controls

Just as some like a firm mattresses and some like a soft one, the Bliss allows you to adjust your jet pressure.  The Bliss has individual jet pressure control for each seat to ensure everyone is satisfied.

Perimeter Lighting
Perimeter Lighting

Perimeter lighting is the perfect way to set the atmosphere in your spa. Over 15 small multicoloured lights offer a gentle glow just below the water line. Choose your colour, set the mood and relax.

multicoloured lighting
Programmable multi-coloured lighting

Standard on the Arcadia Bliss, the underwater programmable multi-coloured light gently sets the mood for after hours spa use. Choose from the five program options and relax. 

SV link
Spanet WiFi control (optional)

Control your spa remotely from anywhere in the world! With the optional Spanet wifi/bluetooth control unit, all you have to do is download the phone app (Android or Apple) and you can control all the spa functions simply and remotely. Also included is the SV HiFi which allows you to stream music from any bluetooth equipped smart device (phone, tablet etc). Sit back relax to your favorite music.

Color Options

Shell Colors
pearl shadow

Pearl Shadow


stirling silver

Stirling Silver

Cabinet Colors
costal grey

Coastal Grey
cabinate- chocolate

Cabinet - Natural


Size, Volume and Weight

Spa measurement
bliss size chart 
spa weight
Empty: 343kg

Full: 1,243kg
spa volume
Volume: 900 litres


Hydrotherapy Rating
Jet Count
Bliss Jet layout
bliss Jet Layout
  • 127mm Directional jet5 x 127mm Directional Jets
  • 88mm directional jet 13 x 88mm Directional Jets
  • 50mm directional jet6 x 50mm Directional Jets
  • 40mm air jet8 x 40mm Air Jets
Jet Types
127mm Directional Jet
127mm Directional Jet
127mm Directional Jets The 127mm directional jets provide and intense, pressure point massage. These are particularly effective at treating knotted muscles in the back.
75mm Directional Jet
88mm Directional Jet
88mm Directional Jets This style of directional jets gives a targeted but less intense pressure point massage. It's very effective for a more prolonged treatment of tired muscles.
50mm Directional Jet
50mm Directional Jet
50mm Directional Jets These jets are usually used in banks of 8 or more jets and are often coupled with 50mm twin spinners to give a shiatsu style pressure point massage therapy.
40mm Air Jet
40mm Air Jet
40mm Air Jets As the name implies, the 40mm air jets emit an air stream as opposed to a water stream. These are almost always used under the legs and buttocks to provide a relaxing soft tissue massage treatment.

Other spas with similar specifications

Energy Efficiency

Consumption at rest
Consumption in use

Programmable Circulation Pump

Up until recently, there were two types of filtration pump systems available. The first was a two speed pump which filtered on low speed and switched to high speed when the jets were turned on. Two speed pumps are still available, but the pumps are usually more noisy and less reliable.

The second system was a very small circulation pump which ran 24 hours a day regardless of whether you needed it to or not. Arcadia instead uses a programmable circulation pump. It is quieter and more reliable than a two speed pump, but can be programmed to run for between 2 and 24 hours per day depending on how much the spa is being used.

Variable Output Heater

The heater of your spa draws more power than any other component. As a result, when the big jet pump or pumps turn on, the heater usually has to turn off, as unless your spa is hard wired, a conventional outdoor power point cannot provide enough power to run the heater and big jet pump at the same time.

Arcadia however, use a variable output heater. This means when the spa's jet pump is turned on, the heater turns DOWN rather than OFF. This has the benefit of maintaining the spa's temperature while you are using it, rather than cooling it down.

High densityHigh Density Lid

As heat rises, most of the heat loss in a spa occurs through the spa's cover. As such, it is important that the spa's cover is manufactured from a high density foam that has better heat retention properties. All Arcadia Spas uses a high density foam insert which is also heat shrink sealed to prevent water ingress, prolonging the cover's life.

Perimeter Insulation

There are several ways to insulate a spa. Arcadia spas have chosen to use perimeter insulation. Whilst more expensive to produce than foaming the shell of the spa, it does have the benefit of insulating the water that is in the plumbing of the spa, as well as the water in the spa itself.

Dual Layer Insulation

Acting like double glazed windows, the dual layer insulation system traps air between the foam insulation on the shell and the reflective foil and foam insulation of the cabinet, to create a pocket of warm air.

This system ensures that not only the water in the spa is insulated, but also the water in the pipework. This option adds a higher level of heat retention than Arcadia’s standard perimeter insulation.

Water Cleaning

Ease of Use
Water Cleaning Technologies
Overall maintenance cost
Ozone Water Clarifier
Ozone Water Clarifier

Ozone is a naturally occurring gas and when mixing with water, is very effective at oxidising and eliminating organic compounds such as algae. Arcadia Spas offer an optional ozone clarifying system that will significantly reduce the amount of sanitiser required to keep your spa clean and clear.

UV purifier

Ozone UV filter combo that removes both bugs and organics meaning you use even less chemicals.

UV Sterilizer

Using the power of ultra-violet light, the Water Sterilizer kills 99.9% of virus and bacteria. Giving you the safest possible spa pool water.

Build Quality

Shell construction
Thermobond shell construction
Thermobond shell construction

Arcadia Spas use a 4 layer thermobond shell construction in the manufacturing of all of their spa shells.

The first layer is acrylic which gives the spa its colour. This is backed by a water proof, vinyl ester resin, marine grade polyester resin, which adds torsional strength, and, finally, a polyceramic layer which adds rigidity.

The shells are oven cured to ensure the correct bonding of the various layers. This is a crucial step that is missed by most manufacturers due to its additional cost.

PVC plumbing
Flexible PVC Plumbing

In order to eliminate the chance of kinks in the plumbing and to prolong life, Arcadia Spas use a flexible PVC plumbing material called Duraflex. This is a flexible tubing that incorporates a spiral of rigid PVC. Unlike the tubing used by many manufacturers, Arcadia Spas Duraflex plumbing is specifically designed for hot, chemically treated water and carries a 5 year no leak guarantee.

Vermin Proof Base

Vermin, snakes and rodents love the underside of spas as it is warm and dry. To repel unwanted visitors, all Arcadia Spas feature a sealed, Vermin proof base and cabinet design.

10 year warranty10 Year Non Pro rata Structural Warranty

All Arcadia Spas are offered with a 10 year 'non pro-rata' shell structure warranty. This means that if the spa's shell blisters or cracks resulting in water loss, for a period of 10 years, the spas shell shall be replaced.

5 year warranty5 Year Plumbing, Heater  & Jet Warranty

The plumbing system of all Arcadia spas is warranted against leaking for 5 years.

The heater and jets of all Arcadia Spas are warranted against defects for a period of 5 years.

2 year warranty2 Year Pump & Equipment Warranty

The circulation pump, jet pump(s) and electronic control system of all Arcadia Spas are warranted against defects for 2 years.

*Please consult your local store for complete warranty details