How to Fill Your Fisher™ Spa with a Single Filter

Need help filling your Fisher™ Spa with a single filter? Proper filling is key to avoiding airlocks and water flow issues. This guide walks you through the process, ensuring smooth and efficient spa operation.

How to Fill Your Fisher™ Spa with a Single Filter

Owning a Fisher Spa means enjoying relaxation and quality time, but to keep it in perfect working order, it’s essential to follow the correct procedures for filling it.

This guide focuses specifically on Fisher Spa models with a single filter and provides detailed steps for successful spa setup and maintenance.

If your Fisher™ Spa uses two filters, please follow the filling instructions below.

Key Takeaways

  • Find out which Fisher™ Spa models feature a single-filter system.
  • Learn the proper steps for filling your single-filter Fisher™ Spa.
  • Get helpful tips to prevent common issues when filling your spa.

Which Fisher™ Spa models a single filter system?

Fisher™ Spas models can come with either a single-filter or two-filter system. If you're unsure which one your spa has, here’s a list of models equipped with single-filter systems for reference.

How to fill a Fisher™ Spa with a single filter | A Step-by-Step Guide

Follow these steps to fill your Fisher™ Spa properly using the single-filter system:

Important reminder: Make sure the spa is turned off before starting the filling process

Step 1. Unscrew the Filter Face

filling single filter spa step 1

If your spa model has screws, remove them by turning counterclockwise. Some models may not have screws, so check your manual for specific instructions.

Step 2. Remove the Spa Filter Face

filling single filter spa step 2

Once the screws are removed (if applicable), take off the filter face carefully to access the filter.

Step 3. Remove the Leaf Catcher

filling single filter spa step 3

Take out the leaf catcher from the filter housing to access the filter.

Step 4. Remove the Filter

filling single filter spa step 4

Twist the filter counter-clockwise to unscrew the filter and remove it from the housing.

Step 5. Remove the Pleated Filter

filling single filter spa step 5

Pull out the pleated filter to fully expose the filter housing.

Step 6. Insert the Hose into the Inlet

filling single filter spa step 6

Place the garden hose into the filter inlet. Do not insert hoses that are more than 250mm in order to avoid damaging the system.

Step 7. Fill the Spa with Water

filling single filter spa step 7

Turn on the water and fill the spa until the water reaches the fill line on the filter face. Avoid overfilling to prevent overflow.

In summary

We hope this guide has provided you with a clear understanding of which Fisher™ Spa models feature a single-filter system and the proper steps for filling your spa.

If you have any additional questions or need further assistance, don’t hesitate to reach out — we’re always here to help!

Five Star Trust Pilot Rating

We are proud that Spa World customers have given us a Five Star Trustpilot rating.