Fisher Lap E™ Swim Spa

Stream you favourite music. Listen to your favourite podcasts. Control and monitor your spa remotely with the included SmartLINK™ WiFi module, built-in amplifier, subwoofer and waterproof speakers. (Requires the free SmartLINK™ app and Android or Apple device)

The SV4 SpaNet™ controller that comes with the Fisher Swim™, not only alows you to save on heating costs with it's dynamic thermal tuning, it also gives you total control from either inside or outside the spa. Turn your lights on/off, change colour and colour modes to fit your mood. Adjust the temperature to your desired comfort levels. Turn the jets or the air bubbles on/off to get the massage you desire.

These composite cabinets are as tough as they are beautiful. Designed to stand the test of time – they are impervious to rot, mould and mildew.

Much of the heat loss from a spa actually happens whilst the spa is circulating water through the plumbing during a filtration cycle. Because most manufacturers insulate the spa's shell, the plumbing is outside of the insulation and heat is lost to the surrounding environment. Fisher Spas™ fit their insulation to the inside of the spa's cabinet, creating an air gap and locking the heat in.

Most of the heat loss in a spa occurs through the spa's cover. As such, it is important that the spa's cover is manufactured from a high-density foam that has better heat retention properties. The Fisher Spa™ covers feature a high-density foam insert which is also heat shrink sealed to prevent water ingress, prolonging the cover's life.

Fisher Spas™ come with a quad-core shell construction making the shell last a lifetime. A layer of American-made acrylic is strengthened with a layer of vinyl ester resin and marine grade polyester resin, this is underpinned by ceramic reinforced resin for unsurpassed strength and rigidity.

At the heart of any good spa is a quality spa shell. After all, whilst pumps and other equipment can be replaced, the shell cannot.

For this reason, Fisher Spas™ use a four layer, eight step lamination process not found in most spas. This process includes curing the shell in a temperature and humidity controlled oven. This is absolutely vital if the shell is to last the distance.

If you do not choose the optional Fisher™ WiFi and Audio Kit but still want to control and monitor your spa remotely from anywhere in the world, you can choose the optional SpaNet™ SmartLINK™ WiFi/bluetooth control unit. Simply download the SmartLINK™ phone app (Android or Apple) and you can control all your spa functions simply and remotely.

If you want to save up to 75% on your spa heating cost, you can choose the optional SpaNet™ Hybrid Heat Pump. This optional integrated system is plug and play with the SV controller.

FisherFrame™ construction is a timber-free framing system that is impervious to rot, mildew or vermin damage. Produced using heavy-duty galvanised steel tubing, it is designed to last indefinitely, hence the lifetime warranty.