What is a spa cover lifter? (Cost, installation and more…)
Using a cover lifter or cover caddy will help you to get the cover on and off your spa with ease, and also minimises the time your cover spends on the ground, keeping it away from dirt and prolonging the life of your spa’s hardcover.
A hot tub cover lifter helps you remove and replace your hot tub cover quickly, easily and efficiently!
What is a cover lifter for a spa?
Ever noticed how difficult it is to lift your spa cover after you’ve finished relaxing in the spa? It suddenly feels a lot heavier, and sometimes results in unnecessary dragging and tugging.
Cover lifters make removing spa covers a simple, one-person operation as the lifter can be attached to one side of your spa. Cover lifters are designed to support the cover as it swings the cover off your spa pool, reducing the physical effort required in removing the cover.
A good quality spa cover will be heavier due to extra insulation, which can make it harder to get on and off your spa than a cheaper lightweight variety. That's where a spa cover lifter comes in. it does all the heavy lifting for you so you can just sit back and relax.
How does spa pool cover lifter work?
Often, when a spa cover is left resting on the ground it can damage the interior plastic and stitching of the cover, weakening it over time. A cover lifter will keep your cover off the ground and ensure the cover weight is distributed evenly.
This will ultimately help to maintain your cover and prevent small damages that lead to heat loss through the cover, saving you money and effort in the long run.
Watch: How to use a cover lifter
Can a cover lifter go on any side of a hot tub?
There are a variety of cover lifter options available, whether you want it attached, freestanding or under-mounted. Ideally, you want the cover lifter to sit at the back of your spa, so it doesn’t block your view once the cover is stacked. You may also want to consider stacking the cover so it creates a wind block or extra privacy.
Keep these things in mind:
- You want the cover lifter to sit at the back or side of your spa, so it doesn’t block your view
- Consider stacking the cover so it creates a wind block or extra privacy while you soak
For easy installation, an under-mounted option will be best.
How much space do you need for a hot tub cover lifter?
You’ll need to allow some room for the cover lifter, as the metal bracing will stick out from the spa, so allow a minimum 20cm on each side of your spa and around 60cm at the back for the cover to rest on, will give you plenty of space.
You can check out some of our cover lifter options below:
Spa World cabinet-free cover lifter
This cover lifter sits under the cabinet of your spa and can be easily installed by placing it under one side of your spa.
- Allows easy one-person operation
- Saves your back from struggling with your spa cover
- Easily fits most portable square or rectangular spas under 2400mm wide and 1 meter high
- Quickly slips underneath the spa (spa may need to be emptied)
- Low cost ($300-400) and no install costs.
Spa Cover Basket Lifter
This cover lifter can sit on the side of the spa cabinet, or rest horizontally with a bracket that holds it up off the ground.
- Makes lifting spa cover easy and hassle-free
- User-friendly, convenient one-person operation
- Keeps spa cover off the ground and protects it from scuffs and damage
- Eliminates stress on spa cover hinges
- Low cost ($400-500) and no install costs.
Not only will a cover lifter save your back, but it will also help to keep your cover clean and off the ground, protecting your cover and your investment for years to come.
In Summary
We hope this article has helped you understand what a spa cover lifter is and if it's the right choice for you.
If you need any more info or advice please contact our customer care team via our website. We're here to help.
Related Articles
How to look after your spa cover (top tips, advice and more)
Your spa’s cover is an essential element in looking after your spa, and knowing how to maintain it will make all the difference. In this article and video, you'll learn some top tips for keeping your spa cover in excellent condition, while reducing your heating costs.
What you need to know when buying a spa (Features, insulation, quality and more...)
Buying a spa can be a daunting task. With so many features to consider, how do you know what's important, what to avoid and which are just marketing gimmicks? This in-depth article plus video explains the top 9 features you should look for in a spa and why they're important.
How much does a spa cost in New Zealand in 2025? (Spa prices, considerations and more)
Want to know how much a spa or hot tub costs? Wondering about price ranges and why there’s such a difference? This article fully answers those questions and more...
Best Spa Pools in New Zealand 2025 – Top 5 Spa Brands Reviewed
Searching for the best spa pool in Australia? Confused by all of the options? This article reviews the top 5 spa brands including price, pros and cons, plus spa owner review videos.
